Incubator

Double walled thermostatically controlled: Inner chamber made of Aluminum/stainless steel. Outer body is made of MILD STEEL. Beaded heating Elements are placed under the ribs at the bottom and sides. Temperature Controlled by Hydraulic Thermostat from 10º C above ambient to 240º C. Dial setting approximate basis. Correct reading as per L- shape thermometer fitted on the front panel at the top. Suitable to work on 220 volt A.C supply. Digital temperature controller, alarm system, timer, blower. Available in 12" x 12", 14" x 14", 18" x 18", 24" x 24"

Round Hot Plate

8" Dia fitted on Iron metal sheet body. Temperature range 240ºC Temperature controlled by Energy Regulator. To work on 220 Volts A.C. complete with 3 core wire and plug.

Humidifier

Stainless steel body capacity 5 liters. The unit is capable of Atomizing up to the cap: 5 litre of Water at full evaporation in the driest possible ambient condition. Humidifier is based on rotates disc. Complete unit F.H.P motor having 2800 RPM. (Without Humidistat).

Rotatory Microtome

The interior mechanism is seated on a heavy cast iron base and completely covered with a metal cover for protection from dust and grit. The Microtome is equipped with a ball and flange type object holder to get exact centering of specimen, knife holder with lateral movement permitting use of complete knife edge and has a feed range from 1-25 microns in steps of one micron each. All components are fabricated from Standard alloys/metals.